Made in the USA
Includes our redesigned and
enhanced LED modules! The improved LEDs offer a modern look, rugged aluminum housing,
and wider beam angle with the same brightness, size and mounting as our
Blaster - Alert is a patented lighting system to make your motorcycle more
visible to oncoming traffic. The Photon Blaster - Alert adds the ability to
flash an extremely noticeable alert sequence to oncoming traffic. This alert
feature supplements the other features of the base Photon Blaster system.
Photon Blaster's two extremely bright LED modules, typically mounted on either
side of the front wheel, function as running lights with our patented flicker
to help catch the attention of inattentive drivers.
This effective, affordable front visibility system is easy to install and includes everything you need: controller, LED modules, wire connectors, instructions. If you do not have a mounting surface for your Photon Blasters, bike specific mounting hardware can be found at this link.
Look up the Skene Mounting Bracket for your bike.
Available with our new enhanced Yellow or White LED
modules. We recommend yellow for front mount applications as studies have shown
that yellow is more visible to the human eye than white and it helps
distinguish you from the headlights of the cars behind you.
WHAT IS INCLUDED?
controller - 1
- New enhanced Yellow OR White LED
module - 2
Velcro squares - 2
connectors - 3
connector - 2
wire - 1
manual - 1
- Current draw: 0.35A
- Operating voltage: 9 - 16 VDC
- LED wavelength: Yellow 591 nm; White 4600
- Intensity regulation: each LED module incorporates
a current regulator to maintain maximum LED brightness even under low
- Beam pattern: oval 20° x 70°
- Control module dimensions: L: 3" W: 1.38" H:
- Control module weight: 1 oz.
- Maximum allowed current: 6 amps for Photon Blaster, 3
amps per side for Photon Blaster-TS
- LED module dimensions: 3" x 13/16" x
- LED module weight: 1.8 oz.
Fully compatible with CAN-bus Systems
Design guarantees this hardware product against defects in materials and
workmanship under normal use for a period of TWO (2) YEARS from the date of
purchase by the original end-user purchaser.
We will need to be contacted prior to return 30 days from
purchase. To be eligible for a refund the product must be complete in original
packaging / not installed and in resalable condition.