The Norden 901 kit transforms your bike by adding blinker and running light functions to your existing Fog light location, while also giving you real auxiliary lights. Options are also available for versions that do not have the turn signal and dimmer functions. If not using the dimmer, we activate the main beam via the factory high beam switch.
The
Norden 901 kit uses the Cyclops 2-inch Aurora LED Aux-light with DRL (yellow halo-ring)
and includes the New IQ-375 controller in a compact wiring harness. Once installed, the user can adjust the auxiliary
driving light low beam intensity, adjust the pulsating conspicuous light mode, and use
the halo-rings as turn signals and running lights. These adjustments are made through the
OEM/Stock high/low beam switch and factory accessory light button. All settings
can be turned On or Off based on the rider’s preference. If the auxiliary light mode is selected the light will drop out when the blinkers are activated. This allows others to see your blinker clearly in the traffic pattern.
Our
Norden 901 light harness is plug and play and connects directly into OEM/Stock electrical
connections. We use the ACC1, ACC2, and the OEM/Stock Auxiliary light switch
connector as plug in points. The blinker connections are Posi-Tap connectors that require no splicing or cutting of wires on your OEM/Stock blinker wiring harness. Additionally, there is no running wires back to the battery for
power, allowing for a very straight forward install.
The
Aurora lights offer superior distance to the factory fogs and reliability in a compact solution. Our
DRL version (included in the Norden 901 kit) are available to keep you seen by
others during daylight hours, as well as a much-needed forward lighting with an adjustable low beam setting for your nighttime Adventures
The New Cyclops Aurora 2-inch light set is rated
at 4000 lumens, using an authentic top binned Cree XHP50 emitter, these lights
pack a punch.
The
Norden 901 kit uses the factory high beam switch to control the Aurora auxiliary
lights, no additional switch is needed for your auxiliary lights. The DRL halo
light option allows the Aurora to be used as a Daytime running light and turn
signal (with the yellow halo ring).
The
Norden 901 kit includes our newest Skene IQ-375 light controller and provides the user
with a variety of auxiliary light dimming options. The controller/dimmer uses
the factory High beam switch to allow you to adjust the low beam setting of the
Aurora lights in 10% power increments from OFF up to 100% brightness, no other
switches added to the bike.
Aurora DRL with
Skene 375 controller capabilities
The Aurora
auxiliary light with yellow daytime halo ring has three different visibility
options.
Default is
Conspicuous mode-ON (The
Aurora yellow halo ring will flutter with a patented conspicuity flicker)
High
beam = Aurora diving lights at 100%, yellow ring shuts off
Low beam = Aurora diving lights off,
yellow ring turns on with the Conspicuity flicker. (You can turn the flicker off)
Turn
Signals – the Aurora yellow halo ring will ALWAYS default to a turn
signal when the turn signal is used.
Daytime
running mode-Conspicuous mode Off
(The Aurora yellow halo rings stay solid yellow)
High beam = Aurora diving lights at
100%, yellow ring shuts off
Low beam = Aurora diving lights off,
yellow ring turns on and stays solid
Turn
Signals – the Aurora yellow halo ring will ALWAYS default to a turn
signal when the turn signal is used.
Auxiliary Driving
Light Mode (The Aurora
driving lights are on, and yellow halo rings off)
High beam = Aurora diving lights at
100%
Low beam = Aurora diving lights at
50% or to your liking.
The
low beam intensity is factory set to 50%, see Skene controller instructions to
increase or decrease the intensity of your low beam.
Turn
Signals – the Aurora yellow halo ring will ALWAYS default to a turn
signal when the turn signal is used.
Specifications
Solid
Steel cradle mount. No broken or cracked mounts!
CNC
machined aluminum housings
Polycarbonate
lenses, Breakproof!
15-degree
beam patterns, a great choice for distance and field of view.
19
watts each
2000
lumens a piece, 4000 lumens for the set.
Includes
a relayed wire harness
Input
voltage 9-30VDC
R113,
R10 TUV and E-mark certified
IP68
Rated
Warranty:
5-year function
