Multi Function 2.0 Turn Signal Kits
Multi Function 2.0 Turn Signal Kits

Multi Function 2.0 Turn Signal Kits

Not for Sale

Choose Options

I want the generic bullet connector option, older KTMs or other brands help
Yes please
I only want the front or back, More parts are likely required, see drop down menu below help
I am ordering the half kit. Add one option below. please read description below (USE DROP DOWN MENU) help
Does your bike use a single indicator light on the dash? if so you will need this part option (see info) help
Diode kit for bikes with separate single (non led) turn-signal dash indicator lights [+$24.95]
 Now shipping the new 2.0 version, these offer pinned joints between the rubber bendable base and PVC housing, making a much stronger joint, We also have added seals on the wires and more water resistance. all orders that have been on back order as of Aug 1 will be this newer version.
  We build these as fast as we can, parts are in stock and orders are filled asap, it may take a few Business days for an order of these blinkers to get out our door.
Please understand the drop down menu, if you have questions please ask. Bikes using half kits will require extra parts that are listed in the drop down menu.
If you have a single indicator light for the blinkers that is not built into the display and is not LED you will need the diode kit.  If it is built in to the speedo display it should not require the diode kit. AKA 790adv, 701adv. 690 adv (BUILT IN) older 690s with separate indicator light do need the diode kit.. AND ALL OTHER KTMS THAT ARE TWIN CYLINDER BIKES do not need the diode kit.
 all 500 and smaller CC KTms and huskies will need the diode kit.

We built these originally around the KTM790adv (USA models), for that bike  you don't need any of the options. same with KTM990adv 2010 and newer and KTM 1090,1190adv
For other bikes please look over the options. Note we have not tested or state these will work on other model bikes in the same family, IE SMR, Duke , etc..

Don't be fooled by thinking these are the same as sold on discount websites, they may look similar but are far from it in terms of reliability, Function, ease of installation, product support.
Now easily turn your blinkers into additional running lights and or brake lights(rear) for added visibility.
Bright white light in the front and red in the rear. You can select to run the rear red as brake lights or red running lights. If ran in brake light setup the red brake lights will come on sequentially flashing twice then go to solid red!  Be Seen!
Dazzling bright Amber sequential blinker functions. 
All in a Extremely rugged rubber stock to help prevent damage from a tip over or impact with brush, trees etc. Bends back 90 degrees or more. These are durable but not unbreakable.
Plug and play kits using factory connectors for all KTMs and Huskies.. also is a generic kit with Bullet connectors supplied. These should work well on most other brand bikes, but you will have to add the connectors that are included in the kit.

Deletes flasher, jump cord included, No need to purchase led flasher units!(full kit)  Your indicator light on dash may not blink with this kit, it will activate, but remain solid. Adding a LED flasher will keep the indicator light flashing.(only doing the front or back may require a LED flasher or load resistor kit)
 Using a tail tidy with these units can cause backfeed problems, we do know that the Rottweiler tailtidy works well with these units using the optional LED flasher.
Available in a kit with all four, or kits for front or rear.
Perfect for KTM EXC 250, 350, 500, 690ADV, 790ADV, 950, 990, 1090, 1190, 2007 and newer.  Husky 350, 501,701
 These will not work on the 1290R or S with the factory LED headlight, They will work on the halogen headlight 1290's

we do have kits for all early KTMs not listed as well, please inquire
   Other models coming soon.

3 year function warranty, Crash Damage not covered.

Warning - Cancer & Reproductive Harm -
This product may contain chemicals that are known in the state of California to cause harm.
Perfect all around
I spent a lot of time researching led front and rear turn signals to upgrade my 2008 KTM 990 Super Duke R. Once I found Cyclops I knew my long search was over. At first I was impressed with the dual function DRL system up front, and dual function brake system for the rear. Then, I submitted an i inquiry and was immediately contacted by one of the owners. Made to order with factory connectors. The posi-tap integration was new to me, and made install remarkably simple. They also maintain the factory flex, so they can take some impact and heavy vibration without worry. I am no electrician, but was able to install these in about 15 minutes after a 16hr work day. Excellent product, excellent customer service, an unbeatable value, fast turnaround, and a 3yr warranty to match. I highly recommend. A new lifetime customer. Thanks Cyclops!
Reviewed by:  from Atlanta, GA. on 6/27/2020
LED Multi Function Turn Signal Kit
Excellent customer service and excellent indicators. Very bright and relatively easy to install! Darryl is very responsive and super helpful. Highly recommended and I buy again from them!
Reviewed by:  from Thailand. on 12/27/2019
love the look and tech on these
I'm sort of glad KTM cheaped out on the 790 Adventure turn signals, as these units offer WAYYY more options.. the installation wasn't too hard for the most part, since I was already removing the headlight in order to install the Aurora DRL light kit.. The headlight on the 790 is a bit of a bear to work with but the key is when reinstalling the headlight, to put the extra wiring up as high as you can inside the headlight mask to keep it from interfering with the headlight when trying to fit it back in. I really like that the front turn signals provide a white light to help with conspicuity, and then change to sequential amber when turning.. and the rear function as sequential red brake lights is also a fantastic touch. way more options then the stock OEM or any of the cheap ali-baba crap that is sold for a few bucks..
Reviewed by:  from Renton, Wa. on 12/25/2019
Much better
I saw a post on FB about these blinkers and were some riders were saying that the same thing was available on Amazon for much less. I purchased the Amazon set and was immediately very disappointed, 2 of the 4 separated during install, they pulled out of the plastics/rubber sleeve leaving them worthless to me, on the two that did not break I bent them over and they then also came apart. not worth sending back I threw them away.. I then called cyclops and talked to them, they assured me that their version would not separate at install and the quality was much better. I had to wait a bit since they were out of stock, but once I did receive the blinkers I was pleasantly surprised, since I was still not completely sure if they were blowing smoke or not. Immediately it was apparent there is a major difference. the post mount is rugged and I could bend, pull etc the blinker without it coming apart in my hands. The KTM connectors and wiring are also very good and truly is a plug and play setup. I guess the moral of my story is, you don't get something for cheap that is any good, You also can't rust what you read online..Cyclops has done a great job with these and I am really happy to have them on my new KTM790R
Reviewed by:  from LA. on 12/18/2019
Super cool!
I saw these on FB and ordered them up immediately.. I installed them on my new KTM790. I hooked up the rear red running lights to the brake light circuit. the factory KTM plugs to the blinkers was really sweet. No messing around! Man what a differnce, they are not only far brighter as far as the blinkers go than stock, but also offer more visibility in both the front and rear.. Absolutely love the way they come on and function. I am supper happy and excited
Reviewed by:  from Dalles Or. on 10/9/2019
There are no reviews for this product!