We have heard you on wanting a brighter setup and have stepped it up, with the 3.0 version coming out very soon. all new bodies, lenses and stems. We are also adding a running and brake light function. These should be available by the end of September. Remember these are still a minimalistic blinker, designed for style and added function, they are not flame throwers.
Now shipping the new 2.0 version, these offer Stainless steel pinned joints between the rubber bendable base and PVC housing, making a much stronger joint, Also SS nuts to prevent rust. Note that the nuts are now SS and not black as shown in the photo.
Much more crash proof. We also have added seals on the wires and increased sealing in the lens to increase water resistance. Longer wire leads are also a slight change from the gen 1 signals.
all orders that have been on back order as of Aug 1 will be this newer version. Note that these are a minimalistic blinker setup, don't expect them to breath fire like our evos will
We build these as fast as we can, parts are in stock and orders are filled asap, it may take a few Business days for an order of these blinkers to get out our door.
Please understand the drop down menu, if you have questions please ask. Bikes using half kits will require extra parts that are listed in the drop down menu.
If you have a single indicator light for the blinkers that is not built into the display and is not LED you will need the diode kit. If it is built in to the speedo display it should not require the diode kit. AKA 790adv, 701adv. 690 adv (BUILT IN) older 690s with separate indicator light do need the diode kit.. AND ALL OTHER KTMS THAT ARE TWIN CYLINDER BIKES do not need the diode kit.
all 500 and smaller CC KTms and huskies will need the diode kit.
Now available in a plug and play, all inclusive kit for the Yamaha T7, Including block off plates to cover those huge holes left after the stock units are removed. all functions work including the blinking dash light. includes all Yamaha connectors, other than a positap for brake light wire. new additions are full length wires to the rear, no more bullet connector sub harness on the T7 kits.
We built these originally around the KTM790adv (USA models), for that bike you don't need any of the options. same with KTM990adv 2010 and newer and KTM 1090,1190adv
For other bikes please look over the options. Note we have not tested or state these will work on other model bikes in the same family, IE SMR, Duke , etc..
Don't be fooled by thinking these are the same as sold on discount websites, they may look similar but are far from it in terms of reliability, Function, ease of installation, product support. These are for all intents and purposes are made in the USA.
Now easily turn your blinkers into additional running lights and or brake lights(rear) for added visibility.
Bright white light in the front and red in the rear. You can select to run the rear red as brake lights or red running lights. If ran in brake light setup the red brake lights will come on sequentially flashing twice then go to solid red! Be Seen!
Dazzling bright Amber sequential blinker functions.
All in a Extremely rugged rubber stock to help prevent damage from a tip over or impact with brush, trees etc. Bends back 90 degrees or more. These are durable but not unbreakable.
Plug and play kits using factory connectors for all KTMs and Huskies.. also is a generic kit with Bullet connectors supplied. These should work well on most other brand bikes, but you will have to add the connectors that are included in the kit.
Deletes flasher, jump cord included, No need to purchase led flasher units!(full kit) Your indicator light on dash may not blink with this kit, it will activate, but remain solid. Adding a LED flasher will keep the indicator light flashing.(only doing the front or back may require a LED flasher or load resistor kit) 790/890ADV will require both a resistor kit and LED flasher if you want the indicator light on the dash to flash
Using a tail tidy with these units can cause backfeed problems, we do know that the Rottweiler tailtidy works well with these units using the optional LED flasher.
Available in a kit with all four, or kits for front or rear.
Perfect for KTM EXC 250, 350, 500, 690ADV, 790ADV, 890ADV 950, 990, 1090, 1190, 2007 and newer. Husky 350, 501,701
These will not work on the 1290R or S with the factory LED headlight, They will work on the halogen headlight 1290's
We do have kits for all early KTMs not listed as well, please inquire.
Other models coming soon.
2 year function warranty, Crash Damage or breakage not covered.