Plug and play!
Get world class lights on your KTM 690.Fits 2012 through 2018, will fit previous years, but the support straps would need to be left off, modified or replaced. Or use the new Forksaver mounts.
Now we have added all years of the 690 and 701, However all 701's and 690s after 2018 require the Forksaver mounts, if you have one of these bikes make sure you check the box on the Forksaver mounts.
This kit uses the Cyclops Aurora 2" LED lights for lightweight, yet extremely powerful illumination performance. The longest distance and brightest two inch LED light on the market!
The Aurora lights offer superior distance and reliability in a compact solution. DRL version is available to keep you seen by others during daylight hours.
We engineered a new stainless steel mount, powder coated black for the KTM 690 and include a plug and play harness for hassle free installation. Also check out the new Forksaver mounts, great option for the 18 and newer 690 and all 701's
Perfectly sized for the 690 were big lights would be out of place and a hassle.
The optional DRL can be used as the designed Daytime running light, or you can use it for the front blinkers. If used as blinkers you may need an LED flasher and diode kit for single indicator dash light.
The basic kit uses the factory high beam switch, so the lights operate with the high beams and are off on low beam. The DRL option would run the Amber Halo during low beam operation, then the auxiliary main beam would come on with high beam.
No running wires back to the battery! Our 690/701 wire harness plugs into acc1/ acc2 for a minimalistic package that gets the job done without a spaghetti factory back to your battery.
Dimming option also available. The dimmer uses the factory High beam switch to allow you to adjust the low beam setting of the Aurora lights from off to 100% in 10% increments, all with no other switches added to the bike! If you choose the DRL option we recommend no dimmer.
Lifetime warranty (excludes crash damage)
20 watts per light
TUV, e13 rated
How to Program Dimmable Harness