2023-24 KTM 890/790 Aurora LED auxiliary light kits

The 2023 KTM 890 is a fantastic bike that deserves a well-rounded lighting setup that actually fits the bike and is not oversized. We ride so we know better!  

 Cyclops KTM 890 LED Aurora auxiliary light kits offer the industries only bike specific plug and play wiring harnesses. We don't just throw a generic wire harness at you with mounts and lights for the 890 like every other provider does. This is a bike specific kit with all connections going into factory plugs in the fairing panels. High beam pickup is via a Posi-Tap.

 The kits include two Spyder wire sub harnesses, so you retain the ability to run GPS's and other electrical devices from factory provided locations.

 We have several wire harness options so you can choose how you want your lights to be configured.

 You can choose wire harness options that include basic on with high beam, off in low beam, or a handlebar mounted switch for independent operation of the lights.

 A great option is IQ-285TS, this offers Dimming capability with an adjustable low beam with 10 different settings with no added switches to the bike. Or you can add a cutout switch that will completely disable the system.

  Hit your high beams the lights are at 100%, go to low beam and they will automatically dim to the level that you have programed into the dimmer. The lights will automatically shut down when you hit your blinker. This makes the blinkers stand out and be visible.

 Another dimming option is the Skene IQ-375. This controller not only allows the DRL rings on the DRL aurora lights to act as supplemental blinkers, but it also offers two modes. Conspicuity mode where the DRL rings on the Auroras will have a conspicuity flicker in low beam mode until the blinker is activated, or at the flick of the included toggle switch allow the lights to operate in low and high beam with 10 low beam brightness adjustments and blinker functions in the DRL ring on the Aurora DRL lights. Main light drops out when the blinker is activated.

 Lighting options are the Daytime running light (DRL) in the Aurora package. With this setup you have the DRl’s on at all times, when you hit the factory high beam switch, the main auxiliary light will come on. If you choose, you can also run the DRL Auroras with a dimmer, In this case we use a switch to use as a drop out, DRL's will be always on, when you activate the switch, you have a low and high beam on the Auxiliary light portion of the Aurora DRL lights, turn the switch off and you have no auxiliary lights other than the DRL.

Skene IQ-375 demonstration
Norden 901

 Isolux graph for a single Aurora 2 inch light below.

Look at these quality features!